Cogged high power wedge belts

Maximize power on space and weight-saving drives.

The perfect solution where space, weight and power are important factors. Raw edge, moulded cogged narrow wedge belts offer increased power capacity, enabling reductions in the number of belts required with potentially significant cost savings. Suitable for a huge range of industrial applications.

cogged wedge belt structure

Transmit the same power with fewer belts or extend belt life by switching from classical v belts to high power wedge belts.
Protorque® raw edge moulded cogged wedge belts are designated to be used with V-belt pulleys according to DIN 2217 / DIN 2211 or ISO4183.

HIGHLY FLEXIBLE

Multi-layered heavy duty industrial backing fabric protects the belts components and supports its tension cords to allow them to achieve high levels of flexibility.

HIGHER DYNAMIC LOAD

Specially treated low stretch polyester tension cords provide higher dynamic load capability and resistance to flex fatigue and shock loads.

INCREASED POWER TRANSMISSION

Deeper profile cogged cushion provides increased support for tension cords allowing higher tensions and resulting increased power transmission capability.

Coiled cogged wedge belt

Deeper Profile

Promotes higher power over classical v belts.

Consistent Length L= L

As per ISO specifications.

Temperature operating range

-40°C TO +70°C

Resistant

Excellent resistance to dust, abrasion and wear.
Good resistance to ozone and sunlight.
Resistant to mineral oil.

Antistatic

Meets ISO 1813 antistatic requirements - Belt lengths smaller than 2540mm.

Friction

Higher coefficient of friction.

Standards

Meets RoHS and REACH requirements.
DIN 7753 Part 1 – ISO 4184 / IP22 RMA-MPTA / BS 3790.

Technical Information

Datasheet (PDF)

ISO 4184 XPZ XPA XPB XPC
Section WxH (mm) 9.7x8 12.7x10 16.3x13 22.0x18
Datum Width (mm) 8 11 14 19
Belt Weight per meter (Kg/m) 0.07 0.11 0.2 0.32
Min. pulley diameter (mm) 50 63 100 160
Max flexing frequency (s-1) 120 120 120 120
Max belt speed (m/s) 50 50 50 50
Min. length (mm) 562 732 1250 2000
Max. length (mm) 3550 4250 4000 5000

Raw edge molded cog high power wedge belts are designed to run in pulleys according to DIN 2217/DIN 2211 or ISO 4183.

Product Range

Product range (PDF)

Sections available

Belt reference (mm) Datum Length (mm)
XPZ 562 562
XPZ 587 587
XPZ 600 600
XPZ 612 612
XPZ 630 630
XPZ 637 637
XPZ 662 662
XPZ 670 670
XPZ 687 687
XPZ 700 700
XPZ 710 710
XPZ 722 722
XPZ 730 730
XPZ 737 737
XPZ 750 750
XPZ 762 762
XPZ 772 772
XPZ 787 787
XPZ 800 800
XPZ 812 812
XPZ 825 825
XPZ 837 837
XPZ 850 850
XPZ 862 862
XPZ 875 875
XPZ 887 887
XPZ 900 900
XPZ 912 912
XPZ 925 925
XPZ 937 937
XPZ 950 950
XPZ 957 957
XPZ 962 962
XPZ 975 975
XPZ 987 987
XPZ 1000 1000
XPZ 1010 1010
XPZ 1012 1012
XPZ 1024 1024
XPZ 1037 1037
XPZ 1047 1047
XPZ 1060 1060
XPZ 1077 1077
XPZ 1080 1080
XPZ 1087 1087
XPZ 1112 1112
XPZ 1120 1120
XPZ 1137 1137
XPZ 1140 1140
XPZ 1150 1150
XPZ 1162 1162
XPZ 1180 1180
XPZ 1187 1187
XPZ 1200 1200
XPZ 1202 1202
XPZ 1212 1212
XPZ 1237 1237
XPZ 1250 1250
XPZ 1262 1262
XPZ 1270 1270
XPZ 1287 1287
XPZ 1312 1312
XPZ 1320 1320
XPZ 1337 1337
XPZ 1340 1340
XPZ 1362 1362
XPZ 1400 1400
XPZ 1420 1420
XPZ 1437 1437
XPZ 1462 1462
XPZ 1470 1470
XPZ 1487 1487
XPZ 1500 1500
XPZ 1512 1512
XPZ 1520 1520
XPZ 1537 1537
XPZ 1550 1550
XPZ 1560 1560
XPZ 1562 1562
XPZ 1587 1587
XPZ 1600 1600
XPZ 1612 1612
XPZ 1650 1650
XPZ 1662 1662
XPZ 1700 1700
XPZ 1737 1737
XPZ 1750 1750
XPZ 1800 1800
XPZ 1850 1850
XPZ 1900 1900
XPZ 1950 1950
XPZ 2000 2000
XPZ 2030 2030
XPZ 2060 2060
XPZ 2120 2120
XPZ 2160 2160
XPZ 2240 2240
XPZ 2360 2360
XPZ 2500 2500
XPZ 2540 2540
XPZ 2690 2690
XPZ 2840 2840
XPZ 3000 3000
XPZ 3150 3150
XPZ 3350 3350
XPZ 3550 3550